Improve operational efficiencies and cold formed steel precision with the technologically advanced roll-forming equipment from FRAMECAD. Designed and manufactured in New Zealand, FRAMECAD's roll-forming equipment integrates innovative engineering, design and production software to produce frames, trusses and joists that are ready to be assembled with ease.
The world's most efficient design and manufacturing technology for cold formed steel, FRAMECAD equipment utilizes a specialized servo-drive motor combined with a world-leading encoder system, creating punches, cuts and chamfers with less than 0.01mm tolerance.
The FRAMECAD® ST950H is a multi-profile system offering fast, efficient, automated production and flexible profile output. With heavy duty gauge capacity up to 97 mils (2.5 mm or 12 gauge) this robust system is ideal for the manufacture of wall frames, wide-spanning roof trusses or long-spanning floor joists. Perfect for large scale production of load-bearing, mid-rise cold formed steel projects.
Developed as part of the FRAMECAD optimized Flooring System; the FL650 is suitable for large scale multi-level, residential or commercial buildings. Producing dedicated C & U profiles between 250mm (10”) and 305mm (12”) in steel up to 2.5mm BMT thickness.
The ST800iT is a multi-profile system that offers full framing capabilities and is ideal for residential and commercial construction. Compiling of four profiles, three flange heights and six frame and truss tools; the ST800iT produces a range of framing options between 89 (3½")- 203mm (10"), with a gauge range of 0.75-1.60mm (22-16 gauge).
A multi-profile solution for flooring and framing construction, the ideal solution for producing light gauge steel framing and flooring profiles with sizes between 92mm (3⅝" ) and 305mm (12"). Built to handle 0.95 – 2.00mm (20 - 14ga) base metal thickness (BMT), the ST900iT can be used in buildings where structural strength is required.
The FRAMECAD ST series offers a multi profile, heavy duty construction roll-forming system that fulfil the requirements of large scale, multi-purpose projects. It produces an infinite range of section sizes from 50mm (2”) - 300mm (12”) within a steel gauge range of 0.55mm to 2.00mm (24g to 14g) BMT thickness.
Producing frames & purlins for portal buildings; the PEB200 has the ability to Ability to roll form C / U / Z and Sigma profiles. The PEB300 provides a truly flexible approach to design and production of PEB and portal framed buildings.
Widen your manufacturing and constructing portfolio with the FRAMECAD FB150i Batten (Purlin) machine. A dual profile, dedicated roof batten roll-forming machine, the FB150i is designed for high speed roof batten production.
The FRAMECAD Mobile Factory is a completely secure, self-contained steel frame roll-forming production facility that can be located anywhere needed, especially in remote areas with little or no infrastructure. Complete with all the equipment necessary for immediate production, the FRAMECAD Mobile Factory is perfect for time critical jobs, or urgent disaster relief housing and reconstruction projects.
The FRAMECAD Twin head decoiler is an option that customers can choose to replace the standard Single head decoiler. This enables customers to always have a spare steel coil loaded on the decoiler which drastically reduces the change over time of coils. This means a big reduction in down time between coil changes for increased production output.
The FRAMECAD system is the intelligent solution for organizations wanting to deliver large scale production and projects. It uses FRAMECAD® patented technology to give a smart lean-design, engineering and fabrication process.
With internet connectivity and the online access to FRAMECAD business support tools, FRAMECAD roll-forming equipment provides cloud-based data reporting to enable real-time production management, and technical diagnostics to improve efficiency and accuracy.
Geared to attract local residents, Sagebrush is a 90-unit building nestled in the foothills of East Gros Ventre Butte and overlooking Flat Creek. Perfectly situated near downtown Jackson, Sagebrush aims to be one of the most popular complexes in the area — and a project Douglass Colony was proud to work on.
When FrameTech Systems outgrew their existing manufacturing facility, they knew it was time for a bigger, more flexible space. As experts in cold formed steel (CFS) construction, they also knew exactly which method they would use to bring that space to life. So how did their award-winning CFS facility come to fruition?
Having made the switch to FRAMECAD’s automated construction system in April 2016, prefabricated steel framing experts SBS Group have used their FRAMECAD system to make significant savings for their customers whilst delivering an accelerated construction process.
SBS Group are continuously working to deliver exceptional results for their customers in a fast and effective manner. The Langdon Apartments are another great example of their dedication to providing accurate, high quality Cold Formed Steel solutions.
