The FRAMECAD System can produce internal walls and ceilings to fit a large range of building designs. This page contains a variety of different sub assemblies that can be implemented in your projects.
FC PW 1 - FRAMECAD magnesium oxide board FRAMECAD magnesium oxide board lining both sides of the FRAMECAD cold formed steel interior frames, with optional Rockwool insulation. |
FC PW 2 -FRAMECAD 15mm fire resistant gypsum Consisting of FRAMECAD 15mm fire resistant gypsum, steel framing and Rockwool. |
FC PW 3 - FRAMECAD 9mm fibre cement FRAMECAD 9mm fiber cement and steel framing. |
FC PW 4- FRAMECAD 6mm fiber cement Consisting of FRAMECAD 6mm fiber cement sheeting and steel framing. |
FC PW 5 - FRAMECAD 6mm fiber cement FRAMECAD 6mm fiber cement sheeting and steel framing. |
FC PW 6 - FRAMECAD 15mm fire resistant gypsum board Double layer of FRAMECAD 15mm fire resistant gypsum board, steel framing and Rockwool. |
FC C 1 - FRAMECAD 9mm magnesium oxide board FRAMECAD 9mm magnesium oxide board over FRAMECAD ceiling battens, optional glass wool for insulation. |
FC C2 - 9mm gypsum - internal ceiling Consisting of 9mm Gymsum board, ceiling battens and rockwook (optional) |
FC C3 - FRAMECAD 15mm fire resistant gypsum FRAMECAD 15mm fire resistant gypsum board, Rockwool, and ceiling battens. |
FCPW7 Non-load bearing wall system 60 min fire rating Framecad two-way 60 min fire rated partition system with ½” jet board – Use North America only. |
The FRAMECAD F325iT is a highly versatile member of the FRAMECAD manufacturing system. Designed to offer increased production speed, greater flexibility and increased reliability, the F325iT roll-forming machine is best suited for residential and light commercial projects.
Featuring the same versatility as the F325iT, the FRAMECAD F325iT-L features an additional 3 tooling stations in the punch block, allowing for more functionality and detailed frame manufacturing.
A rapidly high-performing solution for producing framing and trusses in heavy residential and light commercial buildings. The FRAMECAD F450iT has been designed to handle the heavy gauge steel required to construct 1 to 7 storey structures and outputs 75–150 mm profiles.
As a dedicated roll-forming machine for web joists, the FRAMECAD J325iT features additional punching tools to manufacture web joists up to 40% faster than the rest of the F325iT range. The J325iT allows roll formers to operate a focused web joist line whilst other machines focus on framing and trusses.
