Testing this Introduction. I want to see where its located on the page.
Here you can compare different machines and their attributes.
The F325iT is a highly versatile member of the FRAMECAD manufacturing system. Designed to offer increased production speed, greater flexibility and increased reliability; The F325iT roll forming machine is best suited for Residential and Light Commercial projects.
Featuring the same versatility as the F325iT, this machine features an additional 3 tooling stations in the punch block, allowing for more functionality and detailed frame manufacturing.
Producing wall frames and trusses for pods, modular and residential structures quickly and economically, the P325iT boasts the industries fastest automated high line speed of up to 2,880m/hr. Couple with 12 advanced precision punching functions, this machine delivers high productivity and versatile componentry for roof trusses, walls and floor joists.
As a dedicated roll forming machine for Web Joists; the J325iT features additional punching tools to manufacture Web Joists up to 40% faster than the rest of the F325iT range. The J325iT allows roll formers to operate a focused Web Joist line whilst other machines focus on framing and trusses.
A rapidly high performing solution for producing framing and trusses in heavy residential and light commercial buildings. The F450iT has been designed to handle the heavy gauge steel required to construct 1 to 7 storey structures and outputs 75mm – 150mm profiles.
The FRAMECAD TF550H provides heavy duty manufacturing solutions for high volume production. It has been designed to produce heavy duty framing profiles best suited for all frames, roof trusses, floor joists and roof and floor panels where extra strength in construction is required.
The TM300iT has been specially developed as part of the FRAMECAD optimised truss manufacturing system. It produces 75mm standard size C-section trusses designed specifically for maximum strength at minimum cost.
Developed as part of the FRAMECAD optimized Flooring System; the FL650 is suitable for large scale multi-level, residential or commercial buildings. Producing dedicated C & U profiles between 254mm (10”) and 300mm (12”) in steel up to 2.25mm (12g) BMT thickness.
Widen your manufacturing and constructing portfolio with the FRAMECAD FB150i Batten (Purlin) machine. A dual profile, dedicated roof batten roll-forming machine, the FB150i is designed for high speed roof batten production.
The ST800iT is a multi-profile system that offers full framing capabilities and is ideal for residential and commercial construction. Compiling of four profiles, three flange heights and six frame and truss tools; the ST800iT produces a range of framing options between 89 (3½")- 203mm (10"), with a gauge range of 0.75-1.60mm (22-16 gauge).
A multi-profile solution for flooring and framing construction, the ideal solution for producing light gauge steel framing and flooring profiles with sizes between 92mm (3⅝" ) and 305mm (12"). Built to handle 0.95 – 2.00mm (20 - 14ga) base metal thickness (BMT), the ST900iT can be used in buildings where structural strength is required.
The FRAMECAD ST series offers a multi profile, heavy duty construction roll-forming system that fulfil the requirements of large scale, multi-purpose projects. It produces an infinite range of section sizes from 50mm (2”) - 300mm (12”) within a steel gauge range of 0.55mm to 2.00mm (24g to 14g) BMT thickness.
Producing frames & purlins for portal buildings; the PEB200 has the ability to Ability to roll form C / U / Z and Sigma profiles. The PEB300 provides a truly flexible approach to design and production of PEB and portal framed buildings.
The FRAMECAD Twin head decoiler is an option that customers can choose to replace the standard Single head decoiler. This enables customers to always have a spare steel coil loaded on the decoiler which drastically reduces the change over time of coils. This means a big reduction in down time between coil changes for increased production output.
The FRAMECAD Mobile Factory is a completely secure, self-contained steel frame roll-forming production facility that can be located anywhere needed, especially in remote areas with little or no infrastructure. Complete with all the equipment necessary for immediate production, the FRAMECAD Mobile Factory is perfect for time critical jobs, or urgent disaster relief housing and reconstruction projects.
The all new cutting edge PEB300
Retesting FRAM-5. The following text should be green.
If you decline, your information won’t be tracked when you visit this website. A single cookie will be used in your browser to remember your preference not to be tracked.