US Navy Explores Cold Formed Steel Framing

“Cold formed steel will have a very large impact with the ability of the Navy to rapidly provide humanitarian assistance”

Date: 05 Nov 2018

US Navy Explores Cold Formed Steel Framing

The cold formed roll forming system was particularly investigated for its use in the humanitarian construction efforts of the US Navy, which are often carried out in remote areas with little in the way of local resources, tools or even power.

FRAMECAD has worked with the team involved to provide them with a customised Mobile Factory solution so that they can carry out this important exploratory work into the advantages of cold formed steel.

As the team discovered, a mobile cold formed steel roll forming system, such as the FRAMECAD Mobile Factory, provides many advantages to a team requiring a fast, reliable building system. “Cold formed steel is very easily shipped, it is very compact.” Speed was also an advantage found in the trial, as “one roll (coil) can print out a building of about 16’ by 16’ in a matter of half a day.”

The traditional material used in the remote, developing areas which the US Navy carries out their humanitarian work, is wood but “wood is hard to get in many countries…for example after the earthquake in Haiti… there was a great deal of difficulty in getting wood.” Wood is also an unreliable source as its sourced locally , wherever the humanitarian construction work or disaster relief work is taking place, meaning that “we use the local lumber and three quarters of it is no good, but with cold formed steel, everything is on site.” Using a light gauge steel framing system means that "whatever it is we need made, we can put together” on site and rapidly.

Because of the extreme weather conditions in which some of this humanitarian building is done, high wind resistance is an advantage. The team found that using light gauge, cold formed steel meant that they could construct a "building which could withstand close to 200mile an hour winds. “ In comparison to timber . “it would be very difficult to build a wooden building that could withstand that force.”

Although the exploratory phase of this project is still being carried out, the conclusion has been that “cold formed steel will have a very large impact on the ability of the Navy to rapidly provide humanitarian assistance.”

More Customer Story

Previous of 10 Next
Page 4 of 10
  • Build Back Better in disaster areas with FRAMECAD

    With natural disasters affecting some of the most vulnerable communities across the world, Build Back Better and Safer principles are becoming increasingly important for rebuilding or strengthening buildings in affected areas and protecting the community against excessive damage from future disasters. The FRAMECAD system and the Mobile Factory offers a quick, easily transportable solution to companies and communities looking to rebuild using Build Back Better and Safer principles. Here is just one example of when that’s made a real difference to a community.

  • BîldTEK-Building a revolution

    Central America’s first stand alone steel frame manufacturing plant is open for business, leading Costa Rica into a new age of building.

  • Commodore Steel LLC: Al Ain Residential Complex: A big job easily handled

    Commodore Steel Industries LLC has completed a major high-end residential project in Al Ain using FRAMECAD, an all-inclusive cold-formed steel design build system that conforms to the Abu Dhabi International Building Codes.

  • Corporacion Waraira: A Venezuelan residential development

    There is an overwhelming deficit of housing in Venezuela, but real estate developing in the country can be plagued by many issues. A combination of high inflation rates and increasingly counterintuitive and rapid changes to the legislation surrounding real estate and construction make traditional construction a poor choice due to its slow place.

Previous of 10 Next
Page 4 of 10
Share this page
  1. Home
  2. Construction
  3. Customer Stories
  4. US Navy Explores Cold Formed Steel Framing