Mariposa VII, a 7-storey multi-family building

Mariposa VII, a 7-story multifamily project, fabricated at Douglass Colony's headquarters using FRAMECAD and shipped directly to the jobsite where the building was erected in a total of 40 working days.

Date: 05 Nov 2018

Mariposa VII, a 7-storey multi-family building

The Project 

This seven storey multifamily project was built in Denver, CO with two levels of podium and five upper levels of cold formed steel .  Douglass Colony supplied the pre-panelized metal stud wall framing and offered a turn-key solution with diversified builders as the contracted drywaller.All 422 load-bearing wall panels for levels three through seven of this 7-story (five levels on two levels of podium) project was fabricated at Douglass Colony's headquarters in Commerce City using FRAMECAD and shipped directly to the jobsite where the building was erected in a total of 40 working days, including all wall panels, flooring systems, and detailing with concrete poured and cured.

The Result

Mariposa VII, a 7-story (five levels on two levels of podium) multifamily project was fabricated at Douglass Colony's headquarters in Commerce City using FRAMECAD and shipped directly to the jobsite where the building was erected in a total of 40 working days, including all wall panels, flooring systems, and detailing with concrete poured and cured.

A total of 131,700 lbs of steel was used

  • 33,860 lbs of 14-gauge
  • 49,000 lbs of 16-gauge
  • 48,840 lbs of 18-gauge

The building included a total of 422 panels. All panels were fabricated at the Douglass Colony headquarters in Commerce City, CO in the 6-inch profile.

Two levels of podium

  • Level 3: 81 panels
  • Level 4: 81 panels
  • Level 5: 81 panels
  • Level 6: 81 panels
  • Level 7: 98 panels 

Each level took only 7 days to complete  2 days to assemble and erect the wall panels and 5 days dedicated to finalise the floor system, the detailing on the floor deck, and the concrete. First panel was set on June 21st, 2016 and panels were delivered in 2-week intervals after that (after concrete had completely dried on each level) 

The benefits of the FRAMECAD Technology include:

  • Total design flexibility
  •  1 & 2 hour UL assemblies
  •  Simplified field erection
  •  Complete turn-key solution
  •  Construction in ¼ of the time

If you would like to learn more about Douglass Colony, click here.

More Customer Story

Previous of 10 Next
Page 4 of 10
  • BîldTEK-Building a revolution

    Central America’s first stand alone steel frame manufacturing plant is open for business, leading Costa Rica into a new age of building.

  • Commodore Steel LLC: Al Ain Residential Complex: A big job easily handled

    Commodore Steel Industries LLC has completed a major high-end residential project in Al Ain using FRAMECAD, an all-inclusive cold-formed steel design build system that conforms to the Abu Dhabi International Building Codes.

  • Corporacion Waraira: A Venezuelan residential development

    There is an overwhelming deficit of housing in Venezuela, but real estate developing in the country can be plagued by many issues. A combination of high inflation rates and increasingly counterintuitive and rapid changes to the legislation surrounding real estate and construction make traditional construction a poor choice due to its slow place.

  • FASTSTEEL’S mission to help rebuild better in Chile

    In Chile, a country prone to high-magnitude earthquakes, builders are consistently seeking materials to support seismically-stable designs. Responsible Chilean builders have long understood the necessity of a sound structural design, often using state-of-the-art technologies and products to ensure construction is safe beyond the minimal building code requirements. But typically, the safest construction options are pricey and time consuming, resulting in project delays and compromises for lower quality materials.

Previous of 10 Next
Page 4 of 10
Share this page
  1. Home
  2. Construction
  3. Customer Stories
  4. Mariposa VII, a 7-storey multi-family building